background image

ETC Installation Guide

ColorSource PAR v1.7

Corpora te He a dqua rte rs Middleton, WI, USA +1 608 831 4116
London, UK +44 (0)20 8896 1000 Holzk irc he n, DE +49 (80 24) 47 00-0
Rome , IT +39 (06) 32 111 683 Hong Kong +852 2799 1220 P a ris, FR +33 1 4243 3535
We b

etcconnect.com

Support

support.etcconnect.com

Conta c t

etcconnect.com/contactETC

© 2020 Electronic Theatre Controls, Inc.

Product information and specifications subject to change. ETC intends this document
to be provided in its entirety. Trademark and patent info: 

etcconnect.com/ip

7 4 1 2 M 2 1 0 0 -1 .7 Rev D Released 2020-12

Overview

The ColorSource PAR is an affordable LED fixture that uses the RGB-L (red,
green, blue, and lime) color system to provide a rich, bright light.

The ColorSource PAR is available in both original and Deep Blue variants. The
Deep Blue uses an array that offers richer, more saturated blues and stronger
magentas in exchange for the more jewel-toned blues like sky or turquoise.
For more information, see the ETC website at

etcconnect.com

.

The ColorSource PAR is UL924 listed as a Directly Controlled Luminaire for
use in emergency lighting systems when used with the ETC DMX Emergency
Bypass Controller (DEBC).

Note:

Features described in this document require the latest version

of software. For information on updating fixture software, see

Update

the Fixture Software on page 11

.

Summary of Contents for ColorSource PAR













Reviews: