28
www.eta.co.at
Function block [pool]
Configuration parameter
5.5
Function block [pool]
Parameters to be set
Set or check the following parameters.
Explanation of [Warm-up time]
The runtime of the consumer pump is set with this to
measure the actual temperature of the consumer (e.g.:
pool). This is necessary when, for example, the
temperature sensor is located in the return and not
directly on the consumer.
Explanation of [Hysteresis]
This sets the difference of how far the current
temperature of the consumer [Pool temperature] can
fall from the setpoint [Pool target temperature] to
request heat.
Example:
[Pool target temperature] = 25 °C
[Hysteresis] = 2 °C
=> if the temperature of the consumer falls below 23
°C, heat will be requested.
Explanation of [Pool target temperature]
The desired temperature of the pool to be achieved is
set with this parameter.
Explanation of [Frost protection]
The individual conditions (start time, duration, external
temperature) for the frost protection of the consumer
pump are adjustable.
The start time is defined with the [Start] parameter. If
during this time the external temperature falls below
the limit value set [Enable temperature], the consumer
pump will be switched on for the adjustable duration
[FreezeProtDur].
Explanation of [Runtime]
This sets the runtime of the pump for the water
treatment (regulation of salt content or of pH value re-
spectively). This starts at the same time as the
consumer pump (e.g., pool pump) and remains in
operation for the runtime set.
If the consumer pump is switched off prematurely, the
water treatment pump also switches itself off.
Set the runtime for the water treatment slightly
shorter than the operating time of the consumer
pump. This will prevent a pressure increase in the
pipeline or a false dosing of the water treatment after
the consumer pump has switched off.
Pool
Warm-up time
Hysteresis
Solar producer
Pool target temperature
Boiler/buffer producer
Pool target temperature
Frost protection
Start
FreezeProtDur
Enable temperature
Water treatment
a
a. Only for option [Water treatment].
Runtime
