– The preparation (processing) times depend on the amount, the kind and the quality
of used citrus fruits, but as a standard they are in tens of seconds (about 30 to 180
seconds).
Blender - blending bowl (E),
(Fig. 10)
Mounting and removal
Remove and mount the assembled bowl only when turning regulator
A1
is in the
OFF
position.
Mount the bowl on drive
A7
so that it slides down, then secure it by turning it clockwise till
you hear a snapping sound (at the same time, safety lock
A6
is unlocked).
Pay special
attention to this operation.
Cover the blending bowl with lid
E2
and lid plug
E3
. You can
remove the bowl in the opposite direction. When mounting or removing the container, do
not apply much pressure on the container handle.
Use
The blender is intended for mixing and blending juices, milk shakes, soups, sauces,
mayonnaise, children‘s and diet meals, for puffy dough, sponge-cake dough, making purée
etc.
Blending:
regulation disc
A1
or button
A2
(
PULSE
) used. Setting regulator
MAX
.
Recommendation
- If you process more food, divide it into individual portions to prevent overloading of the
drive unit.
- It is recommended to cut tough ingredients into small pieces. do not process very hard
materials (e.g.
ice cubes, etc.
). The knife would be blunt soon.
- Hard ingredients (e.g.
legumes, soya beans, etc.
) should be soaked in water before
processing.
- Never remove lid
E3
when the drive unit is in operation.
- liquid ingredients (e.g.
oil, milk
) or other ingredients can be added to the bowl only after
removing plug
E4
through the small hole in the lid (when the motor is in operation). We
recommend leaving the plug inserted in the lid during operation so that liquid ingredients
do not splash out through the filling hole.
- The longer you process food in the blender, the smoother the result will be.
- You can also process hot liquids up to the temperature of
80 °C
, e.g. sauces, soups.
- In the case of liquids that create foam (e.g.
milk
) never fill the container up to the „
MAX
“
gauge mark to prevent overflowing. In this case we recommend the amount of about
0.5 l
.
- If you are not satisfied with the result, switch off the appliance, mix the ingredients with
a spatula, take some part of the ingredients or add a little liquid.
- The preparation (processing) times depend on the amount, the kind and the quality of
used ingredients, but as a standard they are in tens of seconds.
After mounting of the assembled blending bowl on the drive unit and after its filling with
ingredients, switch on the appliance by turning regulator
A1
from the
OFF
position (the
appliance is off) to the
ON
position (the appliance is on) (backlight of buttons
A2
and
A3
will start flashing). Start by turning the regulator to the required speed level or by pushing
button
A2
or
A3
. When you have finished, switch off the appliance by turning the regulator
to the
OFF
position (the appliance is
OFF
), then unplug power cord
A8
from the electric
socket.
42
GB
/ 117
