18
www.eta.co.at
Mounting the heat exchanger cleaner
Installation
Fig. 4-20: Bolts
Fasten the bracket together with the drive to the boiler
with three screws.
Fig. 4-21: Drive
Thread the connecting rod onto the bracket and both
pins.
Fig. 4-22: Installation on the left side of the boiler
Manually turn the connecting rod to check its free
movement. For a complete revolution of the
connecting rod, the cam must also be moved manually
in between.
Fig. 4-23: Check freedom of movement
Fasten the connecting rod with a nut to the bracket and
secure to the pins with discs and cotter pin.
Fig. 4-24: Fasten the connecting rod