Installation
Mounting the heat exchanger cleaner
19
Lubricate the cam with heat-resistant grease or a
copper paste.
Fig. 4-25: Lubricate the cam
Mount the sensor
Mount the sensor in the bracket. The position depends
on the mounting side of the heat exchanger cleaning.
See the following figures for this.
Fig. 4-26: Sensor position (mounting on the left side of the
boiler)
Fig. 4-27: Sensor position (mounting on the right side of the
boiler)
Check the gap between the sensor and the connecting
rod. The gap should be about 1 - 2 mm.
Fig. 4-28: Gap