eSync DVR Manual
Revision A
- 38 -
© 2008 eSync Manual
© eSync
System
Setup
3) Sound - To set the detection of input triggered by external microphone. Up to 4/8/16 external microphones
can be set. When a sound from the external microphone is detected, the camera channel assigned to the
microphone will start recording.
1.
Select
{Event}
{Sound}
for the channel using the arrow keys and press the [Select] button.
2. On the selection window, select an audio channel using the arrow keys and press the [Select] button.
3.
Select
{Event}
{Sound}
{Sensitivity}
for the channel using the arrow keys and press the Menu
button.
4. On the selection window, select audio sensitivity using the arrow keys and press the [Select] button.
To set all channels at the same time, navigate the arrow keys to go to the top of the
{Sound}
on
top of the column and press the [Select] button.
4) Post Alarm - To set the recording time after the occurrence of an event
Post
Pre
5 ~ 300 Sec
1.
Select
{Event}
{Post}
for the channel using the arrow keys and press the [Select] button.
2. On the selection window, select the time value 5 ~ 300 seconds by using the arrow keys and press the
[Select]
button.
Time is set in seconds. Whenever an event is detected, recording will be done for the set time.
To set all channels at the same time, navigate the arrow keys to go to the top of the
{POST}
on
top of the column and press the [Select] button.
Occurrence of an event
Summary of Contents for SSA-0424e
Page 1: ......
