eSync DVR Manual
Revision A
- 32 -
© 2008 eSync Manual
© eSync
System
Operation
4) Preset - To store preset settings of the PTZ camera. The DVR can save up to 8 presets per PTZ camera.
The preset number 9 and 0, are used for Tour mode 1 and 2, respectively as explained below.
1. To shift to Preset mode, press the [Select] button in Pan/Tilt, Zoom, or Focus mode.
2. In PTZ Preset mode, select the Preset mode using the left and right directional keys and the [Select] button.
3. Once the PTZ has been moved to the desired location, press the [Select] button on the preset number to
store the preset.
4. Once the preset has been stored, the number will be displayed in blue.
5) Using the Preset Function
Use the left and right directional arrow buttons to choose the presets, and press the [Select] button to call the
preset.
6) Using the Tour mode
To configure the Tour mode, Select
{Application Setup}
{PTZ Setup}
{Tour}
.
1. To set the Tour feature, navigate to the Tour option on the Menu.
2. Press the Tour selection for the desired channel, and press Set.
3. Tour 1 and Tour 2 presets can be saved here.
4. You will be able to define the presets under this window by pressing the [Select] button.
Once you have set the tour mode, Press [ESC] to exit the menu, and go back to the PTZ mode.
5. After the Tour is set, preset 9 and/or preset 0 will be displayed in blue.
6. To activate the tour preset, activate the preset 9 or preset 0 by pressing the [Select] button.
7. To deactivate the Tour feature, press the currently enabled tour presets.
7) Controlling the PTZ Speed
1. Adjust the PTZ speed using the Up/Down button.
2. Speed is set between 1 ~ maximum speed.
3. The maximum speed differs for each PTZ model.
Summary of Contents for SSA-0424e
Page 1: ......
