GB
32 / 44
MA01708100
Settings with the ESY Control app
•
Twilight switch (motion-independent light control on the basis of
the brightness switching value)
•
Light on (switches lighting on permanently, regardless of
movement and ambient light conditions)
•
Light off (switches lighting off permanently, regardless of
movement and ambient light conditions)
Ensure that the exception periods do not overlap.
Setting options: < Exception 1 > < Exception 2 >
Acknowledgement:
The lighting switches on. The detector LED provides
various feedback signals during transmission. After the changes have been
completed, the green detector LED flashes three times to confirm this.
The lighting then switches off.
Example:
Setting in the ESY Control app:
•
Standard operating mode – Fully automatic
•
Exception 1 – Twilight switch
from 9 am until 7 pm
In the application example, an MD 230 is used on the premises of a
retail store in fully automatic operating mode. However, during opening
hours the lighting should be switched on at all times whenever there is
insufficient daylight, even if no motion is detected. The motion detector
therefore operates in twilight switch mode between 9 am and 7 pm.