GB
31 / 44
MA01708100
Settings with the ESY Control app
When the motion detector switches off the lighting as a result of the bright-
ness switching value being exceeded, it must then be re-activated using an
external push button or with the ESY Control app and the ESY-Pen – even
if there is movement.
Semi-automatic operating mode can be overridden at any point using the
ESY Control app and the ESY-Pen. Semi-automatic operating mode switches
off the lighting when no movement is detected and the configured switch-
off delay time has elapsed.
When
< Twilight switch >
operating mode is active, the lighting is
controlled based exclusively on the brightness switching value.
The motion detector ignores any detected movement.
You can find information on setting the brightness switching value and
accepting the current light value in chapter
.
The motion detector automatically switches
on
the lighting when …
•
the level of ambient light is below the configured brightness
switching value
The motion detector automatically switches
off
the lighting when …
•
the level of ambient light is above the configured brightness
switching value
If the lighting is manually overridden via an external push button or via
the
< Light on / off >
setting in the ESY Control app, the motion detector
returns to normal operation when the ambient light value exceeds or drops
below the brightness switching value again.
For the MD 230° / MD 280° devices, two time windows can be set within a 24-
hour period in which they can deviate from the standard set operating mode.
The following options are available:
•
Fully automatic (automatic light control in the event of detected
movement)
•
Semi-automatic (automatic light control in the event of detected
movement, must be activated manually using an external push
button)
Twilight switch
Switching on
automatically
Switching off
automatically
