GB
30 / 44
MA01708100
Settings with the ESY Control app
Every additional movement is indicated by a single brief flash of the red
detector LED and the switch-off delay time is restarted. The detector LED
can be switched off; see chapter
"7.2.7 Detector LED on / off" on page 36
The motion detector automatically switches
off
the lighting when …
•
it does not detect any movement
or
•
the level of ambient light is above the configured brightness
switching value
and
•
the configured switch-off delay time has elapsed
The fully automatic operating mode can be overridden at any point using
the ESY Control app and the ESY-Pen. The fully automatic operating mode
switches off the lighting when no movement is detected and the configured
switch-off delay time has elapsed.
When the
< Semi-automatic >
operating mode is active, the lighting must
always be switched on manually via an external push button or via the
< Light on >
setting in the ESY Control app. After this, the lighting is
controlled based on movement and the ambient light conditions, as is the
case in fully automatic operating mode.
The motion detector automatically switches
on
the lighting when …
•
an external push button is actuated.
The motion detector automatically switches
off
the lighting when …
•
it does not detect any movement
or
•
the level of ambient light is above the configured brightness
switching value
and
•
the configured switch-off delay time has elapsed
Switching off
automatically
Semi-automatic
Switching on
manually
Switching off
automatically
