GB
40 / 44
MA01708100
Maintenance
9.
Maintenance
The device is maintenance-free. In the event of damage the entire device
must be replaced.
9.1 Cleaning
WARNING!
Using the wrong cleaning products will damage the device. Do not use
corrosive cleaning agents or solvents for cleaning and care of the device.
¾
Use a lint-free cloth that is either dry or dampened with water.
9.2 Troubleshooting
Fault
Cause
Motion detector is not
starting up
- Check the cable connection between
the sensor head and the mounting
base. The red wire must be on top.
The lighting does not switch
on automatically – despite
movement
- The level of ambient light is above the
configured brightness switching value
- Lighting has been switched off
manually
- The people are outside the range of
detection.
- The motion detector does not have a
clear line of sight. There are sources of
interference such as shrubs or trees in
the field of detection
-
The configured switch-off delay time is
too short
-
Time-dependent operating modes
are active
