EST Encon Evolution, User Manual

Page: 12 / 72

Gas Requirements

Helium or Nitrogen 60-80 PSI (414-552kPa) 99.999% GC/MS grade purity; BTU/hr. = NA
(compressed gas used for pressurization only)
Voltage

115/230 VAC (+/-10%) 50/60 Hz
Current
Model
115VAC 230VAC
Current (A) Current (A)
Encon Evolution 10 6.3
Battery:

CR2032 battery contained on SBC (CPU) board
Installation Category

II
Pollution Degree

2
Major Options

Sample Foam Sensor

Heated Glassware Kit

Touch Screen Monitor
1.3 Warnings and Symbols:
English

Warnings in the manual or on the Encon Evolution to be observed during installation,
operation, service and/or repair of the instrument. EST Analytical will assume no
responsibility for customers failing to comply with the safety precautions stated.

Use of the Encon Evolution for something other than the intended use of the instrument is
prohibited.

The use of the Encon Evolution is for trained personnel only.

Personnel operating the Encon Evolution should wear safety glasses, safety shoes and
gloves where appropriate.

The Encon Evolution is not intended for use in a hazardous environment.

Installation of the Encon Evolution requires that there is nothing blocking the vents of the
system.

Installation of the Encon Evolution requires that the instrument be placed on a non-
flammable surface capable of handling the weight of the instrument.