Network Controllers Manual
5
Alarm - Red LED, flashing indicates an alarm condition.
Supervisory - Yellow LED, flashing indicates a short on a supervisory
zone.
Trouble - Yellow LED, flashing indicates a trouble condition.
Test/Prgm - Yellow LED, flashing indicates system in test or program
mode.
Alarm Silence (integrated into alarm silence switch) - Yellow LED,
indicates alarm silence (action 9004) has been activated.
Trouble Silence (integrated into trouble silence switch)-Yellow LED,
indicates trouble silence.
Drill/All Call (integrated into drill/all call switch) - Yellow LED,
indicates drill/all (action 9003) has been activated.
CM1 CPU status is indicated by the CPU Fail LED on the associated
power supply.
CM1 communication status is indicated by LEDs on the
communications cards. Refer to the COMM-3/COMM-3S data sheet.
Alphanumeric Display
A 40 character 2 line liquid crystal display provides system status and
program information.
08:53:18 AP 0000 DP 0000
PR
ESEN
T
TIM
E
AC
TIVE
PO
IN
TS
DISABL
ED
P
O
IN
TS
40 CHARACTER CUSTOM MESSAGE
[NWC-003.CDR]
CM1 Display
Status Codes
Fuz =
Fuse
Gnd
= Ground Fault
Acp
= AC Voltage
Vlt
= DC Voltage
Bat =
Battery
Ext =
Trouble
Int
= Internal Fault (ZAS Card/Continuity Jumper, Display,
COMM Card, CPU Card)
Prn =
Printer
1 =
OK
0 =
Fault
firealarmresources.com