background image

27

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com

the original identification or date of manufacture information has been 

altered, obliterated or removed.  In no event shall Essex be liable for 

any damage to persons, property or area surrounding the installation 

site caused by any malfunction of the product manufactured or supplied 

by Essex.
Essex will not pay, nor be responsible for shipping, transportation or 

delivery charges, or other cost of removal of a defective product or 

installation of a replacement product.  The original component replaced 

under this Limited Warranty in any system shall become the property 

of Essex and as such will, at our request, be returned to our factory 

with transportation charges paid by the Buyer.

Limited  Lifetime  Warranty:

 Products carrying Limited Lifetime 

Warranty against defects in materials and workmanship are Essex KTP 

Series Keypads, K1 Series, SKE Series Keypads, KE-265 Series, PEB 

Series and Hand-E-Tap Series Door Access Switches. Only products 

with a manufactured date of 5/1/06 to the present date are covered by 

this Limited Lifetime Warranty.  

Limited 18 Month Warranty:

 Products carrying an 18 month warranty 

against defects in materials and workmanship include External Power 

Supplies,  Hand-E-Wave™,  HID  Edge®  controllers,  products  with 

embedded 125 kHz and 13.56 MHz Card Reader processors including 

the  PiezoProx®,  iSMART™,  K-Prox,  RoxProx™, T-Prox™,  iRox™ 

and iRox Plus™.

Limited 3 Year Warranty:

 Essex KE-1700 Series and AKE-5 Series 

are covered by a 3 year limited warranty against defects in materials 

and workmanship.

Limited 2 Year Warranty:

 Essex products used for Elevator access 

control applications are covered by a 2 year limited warranty.  This 

includes the KE-1000, KE-1900 and SKE-34 used in an elevator access 

control installation.
Essex  Electronics,  Inc.’s  liability  and  Buyer’s  remedy  under  this 

Summary of Contents for KE-265





































Reviews: