
Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com
6
The Installation Procedure
Required Tools
You will need the following tools:
Medium-size, Phillips head screwdriver
1/8” standard screwdriver
Drill
7/8” or 1” (25mm) drill bit
1/2” (16mm) drill bit
5/32” (4mm) drill bit (For 12-Pad 3x4)
3/16” (6mm) drill bit (For 5-Pads & Thinline 2x6)
Prepare the Keypad for Installation
There are different procedures for mounting each Keypad. Locate
the Keypad part number on the back of the Keypad and follow
appropriate mounting instructions below. Keypad templates are
included with each Keypad (except KP-34’s) to assist with the
installation.
Mounting Instructions 5 Pad Non Illuminated: KP-5S and KP-
5SL
1. Select flat mounting surface 3” X 7”.
2. Use “Template A” (included with the Keypad) to mark locations of
holes A, B, and C.
3. Locate and drill the large hole marked “A”. Hole must be at least
7/8” (22mm) diameter.
4. Hold the Keypad against the wall with the connector through hole
“A”. Check markings for hole “B”. Re-mark if required. If using
plastic anchors, drill hole “B” using 3/16” (6mm) bit. NOTE: Plastic
anchors are provided for some mounting applications. If anchors
are not used, holes “B” and “C” must be smaller than 3/16”.