KK-EPA.004 Rev No:0 28.09.18
33
7.1.5. Identifying the Second Line on the Screen (LABEL)
By this menu, depending on the type of sensor that you connected to the input of the EPA200, you can
select which unit to write on the 2nd line of the display. OFF is selected as the factory default. In this case
the second row is empty.
Label Types:
Label
-off-
If the label is set to OFF, it will not write any values in line 2.
Label
Prb.tmp.
You can have the temperature information you get from the
thermocouple or RTD sensor that you can connect externally.
You can get the temperature information from the rtd element located
on the device internally.
Label
Amb.tmp.
Label
Can.dt1
You can provide to be shown data1 information through Can display via
digital communication
Label
Can.dt2
You can provide to be shown data2 information through Can display via
digital communication
Label
Set-1
You can have the 1
st
set values of the relay displayed on line 2
Label
Set-2
You can have the 2
nd
set values of the relay displayed on line 2
Label
Set-3
You can have the 3
rd
set values of the relay displayed on line 2
DISP
The new screen refresh rate you confirmed
with the PRG button has been set. You can
return to run mode with the ESC button.
Press and hold the PRG
button.
OFF
When you press and hold
to the PRG key the value
in the second line starts
blinking. Enter the
desired label by using UP
and DOWN buttons. You
can see label options and
their explanation as
following.
TEMP.
LABEL
TEMP.
LABEL
OFF
