KK-EPA.004 Rev No:0 28.09.18
28
7.1.2. Tare Function (TARE)
In this menu you can specify different Tare functions.
7.1.2.1. Event
On the EVENT menu, you can select the type of Tare Function:
TARE Functions:
7.1.2.2. Input
If your EPA 200, which is manufactured specifically for your order, has the Digital Tare Input module, you
can make settings from the INPUT menu under the Tare menu.
The EDGE option determines at which edge of the tare signal to the module will activate the tare function.
Choose RISE for rising edge, FALL for falling edge. For example; When you connect this signal to a button,
the RISE option activates the Tare when the button is pressed and the FALL option activates when the
button is released.
zero
ZERO: Then the value which is read on the
sensor is made equal to zero and the
Tare
status led lights on.
preset
PRESET: Then the value which is read on the sensor
is made equal to the set value and the
Tare
status
led lights on.
r. zero
REPEATED ZERO: When the first time it is pressed, the value which is
read on the sensor is made equal to zero and the
Tare
status led lights
on. When it is pressed next, the read value returns to the state before
the key is activated, and the
Tare
status led lights off.
r. prst
REPEATED PRESET: When the first time it is pressed, the value
which is read on the sensor is made equal and the
Tare
status led
lights on. When it is pressed next, the read value returns to the
state before the key is activated, and the
Tare
status led lights off.
off
Tare function is completely disabled and the
Tare
status led lights
off.
DISP
The new function you confirmed with the
PRG button has been set. You can return to
run mode with the ESC button.
When you press and hold
to the PRG key the value
in the second line starts
blinking. The desired
function can be selected
by using DOWN and UP
buttons. The functions
and descriptions that can
be selected are shown
below.
off
event
zero
TARE
EVENT
OFF
zero
Press and hold the PRG button.
