Eskon EPA 200 User Manual Download Page 25

Page: 25 / 36

KK-EPA.004 Rev No:0 28.09.18

6.7. KEY TONE (SOUND) SETTING

When you press any key on your device, you can turn the beep sound on and off on this menu. Use ON to
turn on the sound, OFF to turn it off.

6.8. SECURITY (SECURE) MENU

6.8.1. Hide the Menu (HIDE)

By this menu, you can hide the menus that you don't want the operators see.

HD.ALL

HD.OUT

HD.TMP

HD.DSP

All menus are hidden except Secure.

The Output menu is hidden.

The Calib menu is hidden.

The Temperature menu is hidden.

The display menu is hidden.

The Quick Set change menu is hidden.

HD.CLB

HD.FOU.

OUT

When you press and hold
to the PRG key the value
in the second line starts
blinking. You can turn ON
or OFF using the DOWN
and UP buttons.

SOUND

The new sound status you confirmed with the
PRG button has been set. You can return to
run mode with the ESC button.

SOUND

OFF

SECUR

When the PRG button is
pressed and entered, the
hide options screen
appears. The desired type
of hide can be selected
using the UP and DOWN
buttons. The hiding
options and descriptions
are listed below.

HD.ALL

The new hiding status you confirmed with the
PRG button has been set. You can return to
run mode with the ESC button.

HD.ALL

HIDE

Press and hold the PRG button.

Summary of Contents for EPA 200





































Search results

Summary of Contents for EPA 200

Reviews:

Related manuals for EPA 200

Brands by name

Popular brands

Eskon EPA 200, User Manual

Search results

Summary of Contents for EPA 200

Reviews:

Related manuals for EPA 200

Brands by name

Popular brands