KK-EPA.004 Rev No:0 28.09.18
26
6.8.2. Lock the Menu (LOCK)
If you have not set a password before, you will see NPASS in the display when you enter this menu. Press
the PRG key to set the desired password here. Then use the DOWN and UP keys to select ON the menus
you want to lock.
6.8.3. Password Determination (PASS)
Use this menu item to set a password or to change the password you have previously set. If no password
was previously set; When you enter this menu, the display will show NPASS. Press the PRG key to set the
desired password here. If the password has already been set; on the display PASS? will appear and you will
be asked to enter this password. After inputting the password, the display will show NPASS. You can
specify your new password here and confirm it by the PRG key.
6.8.4. Return to Factory Settings (FTRY)
You can return the EPA 200 to its factory settings at any time. Press PRG key to come to this menu to
return to the factory settings. Here you are going to face the PASS? You need to enter 12345, which is the
factory password, not the user password you specified on the password screen.
SECUR
off
When you press and hold
to the PRG key the value in
the second line starts
blinking. Use the UP and
DOWN buttons to get the
menu to the ON position.
The menus can all be
locked at the same time or
separately.
LOCK
on
Lc.all
0ff
Lc.all
on
The new setting you confirmed with the PRG
button has been set. You can return to run
mode with the ESC button.
SECUR
0
When you press and hold
to the PRG key the value
in the second line starts
blinking. Enter the
desired password using
the UP and DOWN
buttons.
PASS
12345
n.pass.
12345
n.pass.
0
The new password you confirmed with the PRG button has
been set. You can return to run mode with the ESC button.
Press and hold the PRG button.
Press and hold the PRG button.