KK-EPA.004 Rev No:0 28.09.18
12
6.3.2 Changing Quick Set Values
You can quickly change the adjustable relay set values when the device is in operation mode.
6.4. RELAY PROGRAMMING MODE
6.4.1. Relay Function Selection
This function selection determines when the relay output will switch on and switch off according to the set
values.
Relay Function Options:
* You can set the functions for other relay outputs in the same way.
SET - 1
0.25
25
Press and hold
the ESC button.
When you press and hold to the PRG key , the
value in the second line starts blinking. Enter
the desired value using the UP and DOWN
Press and hold the UP button
to move to the next step.To
enter a negative (-) value,
move to one of the non-digit
digits and press the DOWN
button.
The decimal digit point starts
blinking. Use the UP and
DOWN buttons to select the
decimal digit point.
25.
0.25
The new SET-1 value you confirmed with
the PRG button has been set. You can
return to run mode with the ESC button.
* You can set the quick set values for other relay outputs in the same way.
SET - 1
20
OFF
The relay does not switch off in any way.
20
Stand.
off
The new function you confirmed with the
PRG button has been set. You can return to
run mode with the ESC button.
Press and hold the PRG button.
.
Funct.
off
OUT - 1
OUT
Other function options can be changed by pressing
UP or DOWN buttons. Function options and
descriptions are shown below.
Funct.
Stand.
