![background image](http://html1.mh-extra.com/html/esco/celculture-co2/celculture-co2_user-manual_2426041019.webp)
9
CO
2
Incubator
e.
Set %O2 Set Point. Use UP/DOWN buttons to select the %O2 set point. Press SET to confirm.
(For suppressed O
2
model only)
4.
Incubator set-up is finish.
5.
The unit will run a memory check.
6.
Incubator will do initial start-up and will continue to the main menu.
The outer door has a magnetic closure, which can be opened by pulling on the rim of the door. The inner glass
door has a tight gasket seal, which prevents the chamber from being contaminated and the chamber
environment from being disturbed.
When the main door is opened, the blower fan and gas supply is automatically turned off.
Note:
Make sure that the door switch will not be overridden or controlled manually or by any means when the main door is
opened.
Allow 2 hours for the incubator to stabilize before proceeding to calibration.
2.7 Disclaimer
The performance and safety of the incubator, while rigorously evaluated at the factory, cannot be guaranteed
once after transit and installation. Therefore the on-site testing is always recommended.
Summary of Contents for CelCulture CO2
