Esco CelCulture CO2, User Manual, Page: 25 / 42

15
CO
2
Incubator
3.2.3.14 Set ULPA Reminder
The ULPA Reminder will alert the user to replace ULPA filter at a set period. Default is set to 12 months.
MENU ADMIN SET ULPA REMINDER 0 ≤ X ≤ 12
3.2.3.15 Replace ULPA Filter
The replace ULPA filter settings must be set when replacing ULPA filter in order for the Set ULPA Reminder to
reset based on the set period.
MENU ADMIN REPLACE ULPA FILTER
3.2.3.16 Set Language
List of language available includes English, Spanish, German, French and Italian.
SPANISH
GERMAN
FRENCH
ITALIAN
MENU ADMIN SET LANGUAGE
ENGLISH
3.2.3.17 Set Date
User can set the date and it will be maintained even after the unit is turned off. The format is YYYY MM DD.
MENU ADMIN SET DATE YYYY MM DD
3.2.3.18 Set Time
User can set the time and it will be maintained even after the unit is turned off. The format is HHMMSS.
MENU ADMIN SET TIME HHMMSS
3.2.3.19 Set RS-485 Address ( for unit with optional Voyager monitoring software )
User can set the RS-485 address for PC connection.
MENU ADMIN SET RS-485 ADDRESS 1 ≤ X ≤ 32
3.2.3.20 Reset Default
User can reset the unit to the factory default settings by choosing this option. The features being reset are all
set points and alarms.
MENU ADMIN RESET DEFAULT
3.2.4 Data Logging
3.2.4.1 Show Data Log
User can set to show temperature, %CO2
,
%O2 (for suppressed O
2
model) and %RH (for units with optional RH
display) data log. The data format is MMDDYY HHMM INFO. Use the UP/DOWN buttons to read through the
log. Press MENU to go back to previous level
MENU DATALOGGING
SHOW %CO2 DATA LOG
SHOW %O2 DATA LOG
SHOW %RH DATA LOG
SHOW TEMP DATA LOG