background image

5

Safety Information

 

 

See the ETS-Lindgren 

Product Information Bulletin

 for safety, regulatory, and other product  

 

 

marking information.

Refer to Manual:

 When product is marked with this symbol, see the instruction manual 

for additional information. Manuals are available for download at ETS-Lindgren.com, or 
contact ETS-Lindgren Customer Service.

High Voltage:

 Indicates presence of hazardous voltage. Unsafe practice could result in 

severe personal injury or death.

Protective Earth Ground (Safety Ground):

 Indicates protective earth terminal. You 

should provide uninterruptible safety earth ground from the main power source to the 
product input wiring terminals, power cord, or supplied power cord set. 
Before power is applied to this instrument, ground it properly through the protective 
conductor of the AC power cable to a power source provided with the protective earth 
contact. Any interruption of the protective (grounding) conductor, inside or outside the 
instrument, or disconnection of the protective earth terminal could result in personal 
injury.

Warning

: HEAVY OBJECT. Unassisted lifting can cause injury. Mechanical assistance is 

required.

STAY CLEAR

 of moving components during operation of equipment.

KEEP CLEAR

 during operation. Falling equipment can cause serious injury.

KEEP HANDS CLEAR

: Moving parts can crush and cut.

Before servicing: contact ETS-Lindgren – servicing (or modifying) the unit by yourself 
may void your warranty. If you attempt to service the unit by yourself, disconnect all 
electrical power before starting. There are voltages at many points in the instrument 
which could, if contacted, cause personal injury. Only trained service personnel should 
perform adjustments and/or service procedures upon this instrument. Capacitors inside 
this instrument may still be CHARGED even when instrument is disconnected from its 
power source.

Invisible Laser Radiation:

 Do not stare into beam or view directly with optical 

instruments. 

Only qualified personnel should operate (or service) this equipment.

WARRANTY

Summary of Contents for ETS-LINDGREN 2301



























Reviews: