ESCO Technologies ETS-LINDGREN 2301, User Manual

Page: 7 / 26

7
Maintenance
Before installing any components, follow the safety information in the ETS-Lindgren
Product
Information Bulletin
included with your shipment.
Disconnect the power before proceeding with recommended maintenance. Do not perform
maintenance while the positioner is operating
Warranty may be void if the housing is opened.
If you have any questions concerning maintenance, contact ETS-Lindgren Customer Service.
Positioner Maintenance Recommendations
Periodic Maintenance
Check cables for wear. Ensure they are clear of potential damage from moving parts.
Ensure bearing and pinion have adequate lubrication.
Replacement Parts
Following are the part numbers for ordering replacement parts for the 2301 Precision
Positioner.
Part Description Part Number
Laser 1723184
Fiber-Optic Cable 705347-10
Emergency Stop Switch Assembly
(IEC inlet and IEC outlet power connections)
1719562
Service Procedures
For the steps to return a system or system component to ETS-Lindgren for service, see the
Product Information
Bulletin
included with your shipment.
Safety Precautions
Removing top panel will expose AC power.
Do not use damaged or crimped AC power cords.
WARRANTY