P
AGE
165
F
IRE
B
ALL
DVDM-100 I
NSTALLATION
& U
SER
’
S
G
UIDE
-
M22003-01A1
A
PPENDIX
G - R
EMOTE
C
ONTROL
Re-Assigning Device Keys
The Remote can be set up to control a second TV, receiver or any combination of eight
home entertainment components. For example, to have the Remote control a TV, a Cable
Converter, and two DVD players , you will need to reassign the unused SOURCE key to
operate the second DVD player as follows:
1. On the Remote, press and hold CODE SET until the LED blinks twice, then release
CODE SET .
2. Enter 9 - 9 - 2. The LED will blink twice.
3. Press DVD once, then press RCV once.
4. The RCV key is now ready to be programmed for your DVD. See Programming
Component Control. To reassign other device keys, repeat steps 1 through 4 by
substituting the key sequence from the below chart for the most popular components:
When a reassignment is done, the LED will blink twice to confirm your choice. At
that time, you will need to program the Remote to control the new component (see
Programming Component Control).