P
AGE
30
F
IRE
B
ALL
DVDM-100 I
NSTALLATION
& U
SER
’
S
G
UIDE
-
M22003-01A1
C
HAPTER
2 - S
ETTING
U
P
Automatic Input Switching
FireBall DVDM-100 will automatically switch the proper video and audio output from
the appropriate DVD changer when you play a movie title. This allows you to use one
input on your a/v receiver or TV instead of 3.
You may use either composite, S-video, or component video connections and analog,
digital, or 5.1 analog audio connections from each changer to the FireBall DVDM-100.
Use the same tye of connections for all changers. Also use the same types of connections
from FireBall to your A/V receiver or TV monitor.
FireBall DVDM-100 is equipped with the following video input and output ports:
•
2 composite video outputs (touch panel and TV)
•
2 S-video outputs (touch panel and TV)
•
1 set of component video outputs
•
3
sets composite video inputs
•
3 sets of S-video inputs
•
3 sets of component video inputs
2
FireBall DVDM-100 does not alter
the video or audio signal quality
in any way. All video and audio
signals are switched and then
passed through FireBall to your
home theater system.
Because video and audio signals
are switched, you must use
matching cable types between
your changers, FireBall, and your
home theater.
For example: If you use composite
video and analog audio con-
netions between your changer
and FireBall, you must also use
composite video and analog audio
connections between FireBall and
your home theater system.
