P
AGE
37
F
IRE
B
ALL
DVDM-100 I
NSTALLATION
& U
SER
’
S
G
UIDE
-
M22003-01A1
C
HAPTER
2 - S
ETTING
U
P
Connecting Digital Audio
u
Use an optical or a digital coax cable (not supplied).
v
Insert one end of the cable into the FireBall Digital Coax or Optical Input Port.
w
Insert the other end of the cable into the Digital Output port on your changer.
x
To connect additional CD changers, repeat steps 1 through 3 using the additional
FireBall digital audio ports provided.
y
Connect audio from each CD Changer to FireBall. Just be sure to connect a
similar type audio input port on FireBall to an audio output port on the changer.
Connecting Devices Using the IR Input
u
Insert an appropriate IR cable that will connect to the 1/8” mini connector input
on the back of the FireBall Unit.
v
Insert the other end of the IR cable into the IR out port on your device.
2
The Sony and Kenwood DVD
changers have both Digital Coax
Out and TOSLink ports and could
be connected through either type
of cabling.
2
Sony CD changers must have
matching S-Link and Optical Digital
Audio ports. For example: the first
Sony changer must use S-Link port
1
and
Optical Digital port 1. The
second Sony changer must use
S-Link port 2 and Optical Digital
port 2, etc...