-- 50 --
fzb2d3ea
12.9 Weldhead offset, mm
Cable area (mm2)
X
Weldhead offset, mm
START SEQUENCE MENU
STOP SEQUENCE MENU
CALIBRATION MENU
DISPLAY MENU
ERROR LIST
Test
0 / 1 / 2
Weldhead offset is the distance between the welding heads.
Used for Tandem welding so that both
Systems
start welding at the same point, see
on page 44.
IMPORTANT!
When setting the distance, “Offset” between welding head no.1 and welding head
no.2, the distance is converted by the PEH to a time between the start of welding
head no.1 and the start of welding head no.2.
The time that PEH can calculate for the distance between start/stop of the welding
power sources is max. 65 seconds.
This means that if for example a welding speed of 50 cm/min is set, it is only
possible to add max. 540 mm as an “Offset”. This is to prevent the time from
elapsing before welding head no.2 has come to the start point.
GB