-- 37 --
fzb2d3ea
12.1.3 Function settings available for
FREE3AX
:
The following menu is shown when
“FREE3AX”
has been selected:
PEH AXES
EXTERNAL AXIS
ROL, POS, LIN
See on page 37
See on page 32
When welding demands connection of an external Roller bed (ROL),
Positioner (POS) or Linear axis (LIN) settings must be made in
“FREE3AX”
.
To steer ROL, POS or LIN the analogue PCB card must be connected.
The PCB gives a reference signal of 0--10V and two direction signals (right and left).
1. PEH AXES
The following menu is shown when
“PEH AXES”
has been selected:
WIRE FEED AXIS
PEH TRAVEL AXIS
Binary inputs
Not used, Guards, Limit sw, Start/stop
DRIVE TRIM MENU
See on page 32
See on page 32
See on page 34
See on page 35
For available settings, see on page 32 -- 36.
GB