ESAB PEH 4.3, Service Manual, Page: 33 / 74

-- 33 --
fzb2d3ea
The following menu is shown when either “ GEAR1 ”, “ GEAR2 ” or “ GEAR3 ” has been
selected:
N1 X
N2 X
By entering values for N1 and N2 any gear ratio located after the motor gears (for
example FHP 36 ) can be selected.
N1 = the number of teeth of the gear wheel of the motor shaft.
N2 = the number of teeth of the gear wheel of the outgoing shaft.
Example:
GB