ESAB PEH 4.3, Service Manual, Page: 31 / 74

-- 31 --
fzb2d3ea
The wire feed motor and wire feed axis are automatically set when either A2TFE,
A2TGE, A2TFH, A2TGH, A6TFE, A6 TGE, A6TFH or A6TGH have been selected.
Table for program version 4.0 and 4.01:
Wire feed axis (wire feed motor):
A2TFE A2TGE A2TFH A2TGH A6TFE ( *1 ) A6TGE
Motor FHP36 FHP68 FHP36 FHP68 VEC4000 VEC8000
Gear1 49:1 49:1 49:1 49:1 156:1 74:1
Gear2 1:1 1:1 1:1 1:1 1:1 1:1
P.D.mm 49 49 49 49 49 49
Encoder ppr 6 0 6 0 0 0
Low manual speed 150 150 150 150 150 150
High manual speed 300 300 300 300 300 300
Travel axis (travel motor):
A2TFE A2TGE A2TFH A2TGH A6TFE ( *2 ) A6TGE
Motor DUNKER2 DUNKER2 FHP258 FHP258 DUNKER1 DUNKER1
Gear1 750:1 750:1 24:1 24:1 375:2 375:2
Gear2 158:100 158:100 51:1 51:1 427:100 427:100
P.D.mm 158 158 158 158 180 180
Encoder ppr 0 0 6 6 0 0
Low manual speed 100 100 100 100 100 100
High manual speed 200 200 200 200 200 200
Table for program version 4.2, 4.3, 5.0 and 5.1:
N.B.
For A6 Mastertrac with serial number 232 or earlier use motor data ( *1 ) and ( *2 ).
Wire feed axis (wire feed motor):
A2TFH A2TGH A6TFH A6TGH
Motor FHP36 FHP68 VEC4000 VEC8000
Gear1 49:1 49:1 156:1 74:1
Gear2 1:1 1:1 1:1 1:1
P.D.mm 49 49 49 49
Encoder ppr 6 0 0 0
Low manual speed 150 150 150 150
High manual speed 300 300 300 300
Travel axis (travel motor):
A2TFH A2TGH A6TFH A6TGH
Motor FHP258 FHP258 FHP258 FHP258
Gear1 24:1 24:1 24:1 24:1
Gear2 51:1 51:1 51:1 51:1
P.D.mm 158 158 180 180
Encoder ppr 6 6 6 6
Low manual speed 100 100 100 100
High manual speed 200 200 200 200
GB