-- 5 --
fzb2d1ea
1.2
Software versions
PEH
From production start 97.07.04
PEH program (Flash, IC 15)
486471880
PEH 1.00 A
DCDUO program (Prom, IC304)
68S07001A02
CHKSUM 0210
Dat. 1997.07.04
From 97.12.12
PEH program (Flash, IC 15)
486471880
PEH 1.1
DCDUO program (Prom, IC304)
68S07001A02
CHKSUM 0211
Dat. 1997.12.12
VEC 8000RPM motor (A6G) can be used.
MEK 4 motor with tacho can be used.
Product code for ”A2TFF1” (Weldtrac) added.
Calibration menu deleted.
From 98.04.04
PEH program (Flash, IC 15)
486471880
PEH 1.1
DCDUO program (Prom, IC304)
68S07001A02
CHKSUM 0221
Dat. 1998.04.04
DCDUO software 68S07001A02, CHKSUM 0221 compatible with hardware 971029 and all later
versions.
Upgraded DCDUO program, preventing unsafe usage of tacho function.
From 98.05.20
PEH program (Flash, IC 15)
486471880
PEH 1.2
DCDUO program (Prom, IC304)
68S07001A02
CHKSUM 0221
Dat. 1998.04.04
External start/stop function
Strip welding
Stainless steel setting. If this function is needed the power source board 486367001A in the LAF must
be used and LAF program version LAF 2.0
ESW welding added (new function added).
From 98.09.30
PEH program (Flash, IC 15)
486471880
PEH 2.0
DCDUO program (Prom, IC304)
68S07001A02
CHKSUM 0221
Dat. 1998.04.04
For access to all new features program version LAF 2.0 (part no 486525880) must be used together
with PEH 2.0.
Inch conversion.
New manual programmable start method added.
From 99.03.20
PEH program (Flash, IC 15)
486471880
PEH 2.1 and PEH 2.2
DCDUO program (Prom, IC304)
68S07001A02
CHKSUM 0221
Dat. 1998.04.04
Improved motor regulator data for better performance at low speed.
GB