Erwin Sattler Rotalis 10 Wood, User Manual

Page: 79 / 108

25
Now you can push the watch with closed bracelet over the watch holder. For better handling
the watch holder can be compressed. In order to secure the watch, the watch holder will
expand to the width of the wristband.
Replace the watch holder in the housing of the winder.
Please make sure that the watches are always set at 12 o´clock position when
inserted.
They will return to this position after each winding interval.
Technical data: Rotalis 24
Case
Crystals
Winders
Drive
Ball bearings
Clock
Height: 88,5 cm (with extended panes 127 cm),
Width: 120 cm, Depths: 20 cm
Safety glass
24 precision watch winders, individually programmable via WIFI,
12 o’clock position
24 high-power motors
144 stainless steel precision ball bearings
Navis Quartz, black dial
- optionally with LED light ring
Nautical instruments Thermometer, Barometer, black dial
Fittings Behind the lower mirror flap 2 removable inserts,
optional: Jewelry Holder, Pen & Bracelet Holder, Watch Holder,
Universal Storage Compartment
Power supply 110–230 V,
If an individual adjustment to the res-
pective movement is to take place, this
can be done by using the integrated
software (SMART INTERFACE).
How to use the software is described
in chapter »Manual for the software
SMART INTERFACE«
see page 38 .
The Navis Quartz and the nautical
instruments are described at the pages
34-37.
Neu Rotalis 14.06.22_Layout 1 14.06.22 11:59 Seite 79