Erwin Sattler Rotalis 10 Wood, User Manual

Page: 59 / 108

The purpose of a watch winder
An automatic watch will work at its best when it is kept permanently in motion. As a rule, a
watch collector only wears one watch at a time; so all other watches in his collection would
stop after 36 to 42 hours. In the event of complications and with »perpetual calendars« in
particular, resetting can often be a very elaborate process.
Erwin Sattler watch winders assume this task effortlessly. Thanks to the modern, easy touse
technology and software, each individual watch winder unit can be adapted to any automatic
movement.
The advantages of the ERWIN SATTLER watch winders
• 100% Made in Germany
• Design, production and assembly in the manufactory in Gräfelfing near Munich
• Each single watch winder can be set individually to the respective movement using the
integrated software/database
• The integrated database contains over 12,000 watch models, with the number of turns
and direction of rotation exactly specified by the manufacturer
• The control simulates the daily routine of a wearer with a 16-hour active phase and an
8-
hour sleeping phase
• The needed turns per day will be spread over the 16-hour active phase
• WLAN technology for individual programming
• The watches are always aligned exactly to 12 o'clock after the winding interval
• Watch holder variants for different strap lengths
• 6 stainless steel precision ball bearings per motor
• Precision motors made in Germany
• A separate motor for each watch winderLED illumination
• The own house alarm system can be connected (except Rotalis 3
, Rotalis 6 Wood
and
Rotalis 10 Wood
)
• Identification by a fingerprint reader (except Rotalis 3
, Rotalis 6 Wood and Rotalis 10
Wood)
5
Neu Rotalis 14.06.22_Layout 1 14.06.22 11:59 Seite 59