ERS EMCH-10W/1, Installation And User Manual

Page: 139 / 190

Size and position of connections
For EMCH-07W/1
Model
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
Water
inlet/outlet
(Ø)
Auto-water
replenishing
(Ø)
Security
discharge (Ø)
EMCH-07W/1
95 126 250 360 68 114 R1 G1/2 G1/2
For EMCH-10W/1 - EMCH-12W/1 - EMCH-14W/1 - EMCH-16W/1
Model
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
Water
inlet/outlet (Ø)
Auto-water
replenishing (Ø)
Security
discharge (Ø)
EMCH-10W/1
EMCH-12W/1
EMCH-14W/3
EMCH-16W/3
300 195 155 105 68 105 R5/4 G1/2 G1/2
Important
a) The installation must be filled to a pressure of between 1 and 2 bars.
b) It is recommended that this operation be repeated after the unit has been operating for a number of
hours. The pressure of the installation should be checked regularly and if it drops below 1 bar, the water
content should be topped-up.
c) Check the hydraulic tightness of joints.
d) An all-pole disconnection device which has at least 3mm separation distance in all pole and a residual
current device (RCD) with the rating of above 10mA shall be incorporated in the fixed wiring according to the
D
A
E
B
F
C
water inlet
auto-water
replenishing orifice
security discharge
water outlet
E
F
C
D
B
A
water outlet
auto-water
replenishing orifice
security discharge
water inlet
44
V.2