ERS EMCH-10W/1, Installation And User Manual

Page: 156 / 190

b. Setting operating mode and function parameters
1) Setting operating mode and water temperature
Setting operating mode: Press “MODE” key to choose operation mode. The setting mode will change as the
following order each time the key is pressed:
Press “OK” key or wait for 7 seconds to confirm. During the setting process, pressing the “CANCEL” key to
exit without saving.
2) Setting water temperature:
Method 1: Press the
“▲”
or
“▼”
to adjust the water temperature after the controller is powered on. Press
“
OK
”
key or wait for 7 seconds to confirm.
Method 2: Setting water temperature in parameters function. Press
“
FUNCTIONS
”
key under main
interface once to enter water temperature setting interface. Press the
“▲”
or
“▼”
to adjust the water
temperature .Press
“
OK
”
key or wait for 7 seconds to confirm.
Water temperature setting check: To check the water temperature setting value, press the “ ” or “ ”key
under the main page(the page displayed after the controller is powered on).
→ →
Cooling
Heating
Water pump
▲
61
V.2