Ericsson T18Z User Manual Download

Page: 47 / 86

Not for commercial use – Ericsson Inc.

Some menus/features are operator dependent.

Forwarding Calls

If you want to make certain that your incoming calls are
correctly handled when you are unable to answer them,
you can use the

Call Forward

service to forward them to

another phone number.

Note!

If you subscribe to the Alternate Line Service (ALS), you
can set different Call Forwards for the two lines, i.e. Line
1 and Line 2.

Note!

The Call Forward service may not be available on all
networks.

Activating Call Forward

1 Scroll to

FORWARD

and press

Y E S

2 Select the forward you want:

• On busy -

forward calls if you are already on the

phone.

• No reply -

forward calls that you do not answer

within a specified time limit (operator dependent).

• Unreachable -

forward calls if your phone is turned

off or if you are unreachable.

Note!

You may use any combination of these options. You may
also forward all incoming calls,

All calls

. A forward indi-

cator in the shape of an arrow is shown in the display. If
you activate the

All calls

forward, all other forwards are

automatically canceled. However, they are activated
again when you cancel the

All calls

forward.

3 Select

Activate

4 Enter the phone number, including the area code, to

which you want your calls to be forwarded and then
press

Y E S

Note!

If the phone number is stored in the phone book, you
do not need to enter it. Press

and then recall the

number.

Forwarding When the Data Menus are On

If you have turned the

Data menus

on, you can set call

forwards for your phone, data and fax numbers respec-
tively. To forward, proceed as described above.

For data and fax numbers, there are only two forward
alternatives:

•

All calls

•

Unanswered (includes On busy, No reply and

Unreachable)

Forwarding Calls

Summary of Contents for T18Z























































































Search results

Summary of Contents for T18Z

Reviews:

Related manuals for T18Z

Brands by name

Popular brands

Ericsson T18Z, User Manual

Search results

Summary of Contents for T18Z

Reviews:

Related manuals for T18Z

Brands by name

Popular brands