Ericsson T18Z User Manual Download

Page: 17 / 86

Not for commercial use – Ericsson Inc.

Some menus/features are operator dependent.

The Display, Keys, and Menus

Key Functions

The keys have multiple functions. Use this table as a
guide for getting the most of our your keypad.

Key:

Use:

• Make calls.
• Answer calls.
• Select menus or submenus.
• Initiate a voice dial call.

• Turn the phone on or off by pressing and holding.
• End a call.
• Go back one level in a menu or leave a setting

unchanged.

and

(arrow keys)

• Access and navigate (scroll through) the menu

system.

• Erase individual digits from the display.
• Erase all digits from the display.
• Mute the microphone during a call.
• Return to standby mode.
• Mute the ringer.

• Enter the digits 0-9.
• Enters the international prefix (+) with 0 key.
• Enter special characters. For instance, to enter X,

press the 9 key twice. See “Entering Characters” on
page 22”.

• Enter a star (*) character.
• Enter a p (pause).
• Switch cases (A or a).

• Enter #.
• Terminate the input of PIN and security codes.
• Enter the phone icon.

• Increase or decrease the volume of the earpiece or

handsfree loudspeaker during a call.

• Show today’s date in the display during standby.
• Reject a call.
• Initiate a voice dial call with upper side key.

When Activated:
• Answers calls.
• Ends calls.
• Illuminates display.

Key:

Use:

T18z

Summary of Contents for T18Z























































































Search results

Summary of Contents for T18Z

Reviews:

Related manuals for T18Z

Brands by name

Popular brands

Ericsson T18Z, User Manual

Search results

Summary of Contents for T18Z

Reviews:

Related manuals for T18Z

Brands by name

Popular brands