Ericsson T18Z User Manual Download Page 22

Page: 22 / 86

Not for commercial use – Ericsson Inc.

Some menus/features are operator dependent.

Making and Receiving Calls

•

Voice Activated Answer (Refer to “Answering or

Rejecting a Call Using Voice Activation” on
page 63.)

Rejecting a Call

You can reject a call any one of the following ways:

•

Double-click one of the volume keys on the side of

the phone.

•

Press

, if the flip is open.

•

Close flip (if activated and open).

•

Voice Activated Answer (Refer to “Answering or

Rejecting a Call Using Voice Activation” on
page 63.)

The caller hears a busy tone if the function is supported
by the caller’s network. If

Forward on Busy

is activated,

the call is forwarded to the number you have specified.

During a Call

Your phone has several functions which you might find
helpful while a call is in progress.

Changing the Earpiece Volume

•

Pressing the upper side volume key increases the

volume.

•

Pressing the lower side volume key decreases the

volume.

Muting the Microphone

Note!

All digits must be removed from the display before mut-
ing can be used.

1 Press and hold the

CLR

key.

Mute

appears in the display.

2 To continue your conversation, release the

CLR

key.

Note!

Instead of pressing and holding the

CLR

key, you can

put the call on hold.

Putting the Call on Hold

Press

Y ES .

1 on hold

appears in the display

1 To continue your conversation, press

YE S

again.

Scratch Pad Function

If you need to make note of a phone number during a
call, you can use the Scratch Pad.

1 Use the number keys to enter the number.

0:22

Volume

Summary of Contents for T18Z























































































Search results

Summary of Contents for T18Z

Reviews:

Related manuals for T18Z

Brands by name

Popular brands

Ericsson T18Z, User Manual

Search results

Summary of Contents for T18Z

Reviews:

Related manuals for T18Z

Brands by name

Popular brands