INDIVIDUAL CALL - When the radio receives an individual call
(a call directed only to the user’s radio), it unmutes on the
assigned working channel and turns on and . Line
one shows ID followed by the logical ID number of the unit
sending the message, or the associated name if the ID
number is found in the individual call list.
Responding to the call prior to the programmed call-back
time-out will automatically direct the call to the originating
unit. If the caller’s ID is not received, UNKNOWN will display
and there will be no call-back hangtime.
S
Se
en
nd
diin
ng
g A
A C
Ca
allll
1.
Turn on the radio and set the POWER ON-OFF/VOLUME
knob to the desired volume level. Select the desired system
and group.
2.
Press and hold the PTT button. The radio will display
, the system and group names and perform the neces
-
sary signalling required to obtain a communication channel.
3.
When the working channel is assigned, and
are turned on and a short beep sounds indicating that
communication can begin.
4.
Hold the radio approximately three inches from the mouth
and speak in a normal voice into the microphone (located
between
,
and
.
on the keypad).
5.
Release the PTT button when the transmission is complete
and listen for a reply.
S
SV
VC
C
S
SV
VC
C
3
35
5
