A fixed scanlist has been pre-programmed into
the radio. It is not possible to change the list
without reprogramming the radio.
4.
To add or delete additional groups, repeat steps 2 and 3.
A channel can also be deleted from the scan list, if it is not
the currently selected channel, by pressing
a
key during
scan operation while the radio is displaying the unwanted chan
-
nel. The channel will be deleted from the conventional system’s
channel scan list in the same manner as if done using the steps
above. Deletions done in this manner will not remain deleted if
the radio is turned off and then back on.
T
Tu
urrn
niin
ng
g S
Sc
ca
an
n O
On
n
1.
Toggle scan operation on by pressing
s
.
will turn on when the radio is scanning.
2.
When a channel on the scan list receives a channel assign
-
ment, the radio unmutes on the assigned channel,
comes on and the received scan channel is displayed.
-
The radio will continue scanning if a new channel is selected
when scan is on.
-
Pressing the PTT button when scan is on will cause the radio
to transmit on the displayed channel or to the currently
selected channel (depending on programming).
2
2
11
S
SC
CN
N
S
S
S
S
2
2
11
5
511
