a call is received. If the priority system control channel is found,
the radio will automatically switch to the priority system.
S
Sc
ca
ann
nniin
ng
g T
Trru
un
nkke
ed
d G
Grro
ou
up
ps
s
Groups which have been previously added to the scan list on
a per system basis may be scanned. Each system’s group scan
list is retained in memory when the radio is turned off or when
the battery pack is removed.
The following procedures outline scan operations for trunked
groups. See the conventional mode operating procedures for
specific procedures on conventional channel scanning.
A
Add
ddiin
ng
g a
an
nd
d D
De
ellet
etiin
ng
g G
Grro
ou
up
ps
s o
on
n S
Sc
ca
an
n L
Liis
st
t
1.
Scan must be off to add or delete groups from scan list. If
the status flag is on, press
s
key to turn scan
off.
2.
Select the desired group using the SYS
-
TEM/GROUP/CHANNEL knob and/or
,
.
keys.
If the selected group is currently on the list, the status
flag will be on.
3.
Press the
a
key repetitively until the desired priority
indicator appears: for non-priority, for priority two,
for priority one, or no indicator to remove the group from
the scan list. If a new priority group is selected, the pre
-
vious corresponding priority group will become a lower pri
-
ority scan group. One of the following messages may be
momentarily displayed:
SCAN DIS
The radio is not programmed to scan.
B
BS
SY
Y
3
38
8
