If system selection is programmed to the SYS
-
TEM/GROUP/CHANNEL knob, select a system
by turning the SYSTEM/GROUP/CHANNEL
knob to the desired system number position (1-
16). The display registers the new system name
on line one. If the knob is moved to a position
greater than the number of programmed sys
-
tems, the highest programmed system will re
-
main selected.
METHOD 2:
If system selection is programmed as the pri
-
mary function of
,
and
.
, select a
system by pressing
,
or
.
to scroll
through the system list. The display registers
the new system name on line one.
METHOD 3:
Press
m
to enter the system select mode
and follow the selection mode rules detailed
earlier. If system selection is programmed to
the SYTEM/GROUP/CHANNEL knob, direct ac
-
cess to systems will not be available. Presses of
,
or
.
will scroll through different
sets of 16 systems each (banks) if more than
16 systems are programmed into the radio. The
systems within each bank are then selectable
via the SYSTEM/GROUP/CHANNEL knob as
described previously in METHOD 1.
G
Grro
ou
up
p A
An
nd
d C
Ch
ha
ann
nne
el l S
Se
elle
ec
ct
tiio
on
n
Several methods, some of which depend on programming,
can be used to select a new group or channel. These procedures
are presumed to be starting from the normal receive display.
3
32
2
