background image

 

3.

 

Remove the battery pack by sliding it away from the bat

 

-

 

tery latch until it separates from the radio.

 

IIN

NT

TR

RIIN

NS

SIIC

CA

AL

LL

LY 

Y S

SA

AF

FE 

E U

US

SA

AG

GE

E

 

Selected portable radios with appropriate factory installed

 

options are certified as Intrinsically Safe by the Factory Mutual

 

Research Corporation. Intrinsically Safe approval includes Class

 

l, II, Ill, Division 1 hazardous locations in the presen ce of Groups

 

C, D, E, F and G atmospheres. Non-Incendive approval includes

 

Class I, Division 2 hazardous locations in the presence of Groups

 

A, B, C and D atmospheres. 

 

Hazardous locations are defined in the National Electrical

 

Code. Useful standards NFPA 437A and NFPA 437M for the

 

classifications of hazardous areas can be ordered from the

 

National Fire Protection Association, Batterymarch Park,

 

Quincy, MA 02269.

 

B

BA

AT

TT

TE

ER

RY 

Y P

PA

AC

CK

KS

S

 

Only battery packs identified with a green latch shall be used

 

with a portable radio that is rated and labeled as Factory Mu

 

-

 

tual Intrinsically Safe. Use of nonspecified battery packs voids

 

Factory Mutual approval. The following battery pack options are

 

approved for use in intrinsically safe radios.

 

PKPA5X

 

Rechargeable Battery Pack,

 

Extra High Capacity (Tall Case)

 

PKPA5W

 

Rechargeable Battery Pack,

 

High Capacity (Short Case)

 

7

74

4

Summary of Contents for EDACS M-RK-II SCAN





















































































Reviews: