T
Trra
an
ns
sm
miitt
ttiin
ng
g A
An
n E
En
nc
crry
yp
pte
ted
d C
Ca
allll
1.
Select the desired group or channel.
2.
Place the radio in private mode by pressing the
m
key,
then follow the selection mode rules. When private mode is
enabled, the status flag will be on.
If the last state of the radio was private mode, the private
mode will be enabled on power up. Also the private mode will
be enabled if forced operation has been programmed in the
radio.
If a group or channel is not programmed for private mode
operation, "PVT DIS" will be displayed if an attempt is made
to enable private transmit mode. It is not possible to oper
-
ate on this group/channel in private mode.
If the radio is programmed for forced private transmit op
-
eration, "FRCD PVT" will be displayed if an attempt is made
to disable private transmit mode. It is not possible to
transmit on this group/channel in clear mode.
If the radio does not have the correct encryption key
loaded, "NO KEY #" will be displayed and the call will not be
transmitted.
3.
Continue with standard transmission procedures. A pri
-
vate mode access tone will be heard when the PTT button
is pressed.
P
PV
VT
T
6
60
0
