tion or working channel (WC) is allocated through digital signal
-
ling with the site.
R
Re
ec
ce
eiivviin
ng
g A
A C
Ca
allll
1.
Turn on the radio by rotating the POWER ON-OFF/VOLUME
knob clockwise (out of detent). A short alert signal (if en
-
abled through programming) indicates the radio is ready to
use.
2.
The display shows the last selected or the power up (de
-
pending on programming) system and group names and
indicates if the radio has acquired the system control
channel by turning on . If the radio is unable to obtain
a control channel, line two shows CC SCAN and will
remain off.
3.
Adjust the POWER ON-OFF/VOLUME knob to the desired
volume level.
4.
Select the desired system and group. The display indicates
the current system and group names.
5.
The radio is now ready to receive calls.
6.
GROUP CALL - When the radio receives a group call, it un
-
mutes on the assigned working channel and
comes on. Line one shows GR followed by the logical ID
number (if received) of the unit sending the message, or the
associated name if the ID number is found in the individual
call list.
7.
3
34
4
