Front Panel Menus
To navigate to the next level of menus press the right arrow key.
The front panel menu structure is as follows:
Status LED
Please refer to Looking After the Unit> Troubleshooting> Handling Alarms>
Alarms
.
User Access
User Authentication
The unit supports user authentication as defined in the XPO Specification. The default for this is set to off. When set to on a
username and password are required to access the web pages.
The default username (engineer) and password (password) can be changed by the user.
Top Level Menu
To navigate to the
next level of menus
press the right arrow
key.
To return to the top
level menu press
the left arrow key.
Use the up and down
arrow keys to move
between these menus.
To access these parameters
press the right arrow key,
and then the up and down
arrow keys to move between
parameters.
IP address & Service
name(s)
> System
> Remote Control...
> IP Address
Set up the IP
parameters for the
Ethernet Control ports
using the edit and up
and down arrow keys.
> Subnet Mask
> Gateway Address
> Alarms...
Lists currently active
alarms.
> Versions...
Host Version
The versions list gives
the overall build
versions of the Host
chassis, (Software
Version), Assembly Date
of the chassis and the
Serial number.
> HW Config
This menu allows the
current hardware
configuration, i.e. the
option cards fitted, to
be accepted as the
expected hardware
configuration.
© Ericsson AB 2011. All rights reserved
Page 79 of 153
Cover
9/11/2012
file://C:\Users\ebriacl\AppData\Local\Temp\~hh7DF.htm
