Mounting in a Rack
Gives information associated with fixing the unit into a rack and the care and positioning of cables.
External Interfaces
Describes the connectors relating to the basic unit and any option modules.
Preliminary Checks
Mechanical Inspection
When taking delivery of an Encoder, check the equipment items delivered against the enclosed delivery note. Inspect the equipment
for damage-in-transit. If in doubt, please contact
Customer Services
.
WARNING!
Removing the covers of this equipment may invalidate any warranties, cause a safety hazard or/and affect the EMC performance.
Check with
Customer Services
.
Moving the Equipment Safely
Do not place this product on an unstable cart, stand, bracket, or table. The product may fall, causing serious injury and serious
damage to the product. Use only with a cart, stand, bracket or table recommended by Ericsson.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
Do not move or carry the equipment whilst it is still connected to the supply or other leads, is live or is in operation.
See, also:
The Handling and Lifting section in
Read This First
!
Appendices > Handling Option Cards >
Handling Option Cards
Site Requirements
This chapter provides a guide to the suitability of an installation and gives detailed procedures for the preparation and installation of
the equipment. Also details the external connectors and provides important safety information.
AC Power Supply
Gives information relating to the AC power inlet and associated components.
Power Consumption
Details the power consumption of the base chassis and each option card.
© Ericsson AB 2011. All rights reserved
© Ericsson AB 2011. All rights reserved
Page 30 of 153
Cover
9/11/2012
file://C:\Users\ebriacl\AppData\Local\Temp\~hh7DF.htm
