IP Address Restrictions
IP Addresses on the unit must adhere to RFC3330 range of restrictions as listed in the following table of allocated IP addresses.
Note: The control network and data networks should not conflict. It is suggested that the ranges for these networks are in
the Private-Use Networks as listed in the summary Table.
IP Address range 192.168.10.x (subnet 255.255.255.0) is used for internal unit communications, so should not be
used for external communications.
Manual Configuration via the Web Pages
The Video Processor has been designed to be configured and controlled by nCC, however a web interface is available to configure
the unit (primarily for use during development).
1) Configure Video parameters as required
Browse to web page:
Configure > System > Option Slots > Option Slot *
Pre-processor
Source
Frame Rate
Address Block
Present Use
Reference
0.0.0.0/8
"This" Network
[RFC1700, p4]
10.0.0.0/8
Private-Use Networks
[RFC1918]
14.0.0.0/8
Public-Data Networks
[RFC1700, p181]
24.0.0.0/8
Cable Television Networks
---
39.0.0.0/8
Reserved but subject to allocation
[RFC1797]
127.0.0.0/8
Loopback
[RFC1700, p5]
128.0.0.0/16
Reserved but subject to allocation
---
169.254.0.0/16
Link Local
---
172.16.0.0/12
Private-Use Networks
[RFC1918]
191.255.0.0/16
Reserved but subject to allocation
---
192.0.0.0/24
Reserved but subject to allocation
---
192.0.2.0/24
Test-Net
---
192.88.99.0/24
6to4 Relay Anycast
[RFC3068]
192.168.0.0/16
Private-Use Networks
[RFC1918]
198.18.0.0/15
Network Interconnect Device Benchmark Testing
[RFC2544]
223.255.255.0/24
Reserved but subject to allocation
---
224.0.0.0/4
Multicast
[RFC3171]
240.0.0.0/4
Reserved for Future Use
[RFC1700, p4]
© Ericsson AB 2011. All rights reserved
© Ericsson AB 2011. All rights reserved
Page 48 of 153
Cover
9/11/2012
file://C:\Users\ebriacl\AppData\Local\Temp\~hh7DF.htm
