Erbe VIO 100 C, Service Manual

Page: 24 / 42

5 • Remedying malfunctions
24
/ 42
801
16-
221

10.
15
27 The Plus selection button (CUT) was
pressed when switching on the unit.
Check whether the correspond-
ing button was pressed when
switching on the unit. 
If not, notify Erbe Service.
28 The Minus selection button (CUT) was
pressed when switching on the unit.
Check whether the correspond-
ing button was pressed when
switching on the unit. 
If not, notify Erbe Service.
29 The Plus selection button (COAG) was
pressed when switching on the unit.
Check whether the correspond-
ing button was pressed when
switching on the unit. 
If not, notify Erbe Service.
30 The Minus selection button (COAG)
was pressed when switching on the
unit.
Check whether the correspond-
ing button was pressed when
switching on the unit. 
If not, notify Erbe Service.
31 The focus button for bipolar recepta-
cle was pressed when switching on
the unit.
Check whether the correspond-
ing button was pressed when
switching on the unit. 
If not, notify Erbe Service.
32 The focus button for monopolar
receptacle was pressed when switch-
ing on the unit.
Check whether the correspond-
ing button was pressed when
switching on the unit. 
If not, notify Erbe Service.
33 More than one button was pressed
when switching on the unit.
Check whether buttons were
pressed when switching on the
unit. 
If not, notify Erbe Service.
34 – 42 Restart the unit. If the error
occurs again, notify Erbe Ser-
vice.
43 The unit temperature is outside the
operational range.
If the temperature is too high,
allow the unit to cool down.
If the temperature is too low,
allow the unit to acclimate to
room temperature.
If the error still occurs, notify
Erbe Service.
44 – 50 Restart the unit. If the error
occurs again, notify Erbe Ser-
vice.
Error
code
Description Additional informa-
tion
Action